Electric mill with hammers 2.5kw (Nr. 4)

Description

Electric mill with hammers 2.5kw (Nr. 4).

The electric mill for grinding feed is provided with hammers and knives for the two operations of grinding feed as well as for flour. Through the side hole, insert the coccine and alfalfa and the fodder you want to chop. Through the hole above, the grains are inserted to carry out the flour milling operation. You can attach the mill to a special support or to a table/bench. It is provided with a support sole and fastening screws.
Product description
The KBTR-180 mill is mainly used for grinding small crops or other products, such as: wheat, barley, rye, etc., into flour (powder) and stalk fodder in the preparation of feed for animals in the household or on private farms. Farmers use this flour for animal feed. To obtain a finer flour, you must use a finer sieve and for a flour with a larger grain, a sieve with larger holes will be used. For this mill there are five types of sieve depending on your needs. This mill is a new product developed in the factory of the producer Little Farmer, having a compact structure, easy maintenance, superior performance being used on a large scale. It allows a large production, in relation to its small dimensions.

Use of the product:
The operating state and the environment must be at a normal temperature.

Working conditions:
The working place of the machine should be ventilated, dry, ventilated, with light and provided with fire extinguishing equipment.

Prohibition information:
In particular, it is forbidden to use the mill for: crushing garden objects such as iron chips, coal, wood, stone blocks, etc.; products that can generate gas or dangerous substances; operations other than those for which it is intended.

The impact for the environment and energy:
There is no environmental and energy concern with this machine in normal operation, this product will not cause environmental pollution or energy waste.

Safety:
It is forbidden to let children near the product during operation. With normal use and correct operation, the safety of the operator should not be threatened. The machine was designed to be used as described. Any other kind of use can lead to the breakdown of the machine and endangering the user, for which the manufacturer or the dealer cannot be held responsible.

Customer benefits:
•corn cob crushing function;
• thermally treated metal tub;
• quality knives;
• long lifespan of the product: 7 - 10 years.

Advantages of the electric hammer mill no. 4, Little Farmer GF-0889:
• fast grinding capacity;
• the exceptional reliability of the engine;
• very good resistance of the metal tub;
• improved quality of the knives;
• single-phase, asynchronous motor with starting capacitor.

Accessories included:
• crushing site;
• hammer-shaped knife for quick shredding.

Switch: engine No
Clamping type: For bench
Anti-backflow system: Standard equipment
Flow regulation: Standard equipment

NOTE: THE PRODUCT IS NOT SOLD TOGETHER WITH THE MILL SUPPORT!

Support can be purchased separately from here:

https://www.generalmotor.ro/mori-pt-cereale/suport-pentru-moara-nr-1-2-3

Mill consumables:

Hammers: https://www.generalmotor.ro/mori-pt-cereale/ciocanele-schimb-moara-pentru-cereale-nr-2-3-4