Oil mixture for chainsaw Husqvarna XP original 1L (sintetic)

Description

Mixture: 1:50 (2%) ie 20 ml per 1 liter of gasoline

Packaging: 1 liter (bottle with 140 ml dispenser).

The vial is provided with a 140 ml dispenser.

Original Husqvarna product.

XP Synthetic Oil for 2-stroke engines XP Synthetic oil for 2-stroke engines is a completely synthetic oil, which means that it is the most stable of Husqvarna lubricants at high temperatures. XP Synthetic Oil is also biodegradable, so that once it passes through the engine of the machine, the oil in the exhaust will decompose, giving users a better working environment. As with the other 2-stroke engine oils in this range, XP Synthetic offers high durability and professional performance, as well as reduced exhaust emissions.

Notice! The chainsaw is driven by a two-stroke engine and must be powered by a mixture of gasoline and oil for two-stroke engines. It is important to accurately measure the amount of oil used to ensure a proper mixture. When preparing small amounts of fuel, even the smallest deviations can drastically influence the composition of the mixture.

Always mix gasoline and oil in a clean tank for gasoline.
Always start with half the amount of gas. Then add the entire amount of oil. Stir (shake) the fuel mixture. Add the rest of the gasoline.
Stir (shake) the fuel mixture well before filling the chainsaw's fuel tank.
Do not stock up on fuel for more than a month.
If you do not use the chainsaw for a long time, the fuel tank must be emptied and cleaned.

Attention! Engines equipped with a catalyst must be supplied with an unleaded oil-petrol mixture. Leaded gasoline destroys the catalytic converter, the function will cease to exist. The green fuel tank cap on the chainsaws with catalytic converter indicates that they should only be refueled with unleaded petrol.
The minimum recommended octane number is 90. If the engine is powered by gasoline with an octane number less than 90, detonations may occur. This leads to increased engine temperature and increased loads, which can lead to severe engine damage.
When working at high speeds for a long time (eg when cutting branches), a higher octane number is recommended.
Use unleaded gasoline or good quality leaded gasoline.

Use Husqvarna two-stroke engine oil, specially designed for optimal results and performance with air-cooled two-stroke engines.

Never use oil cooled outside the dashboard, water-cooled, sometimes called suspended engine oil (TCW).
Never use four-stroke engine oils.
Poor quality oil or too rich oil / fuel mixture can endanger the operation of the catalytic converter and reduce its service life.