Oil mixture for chainsaw Husqvarna original 1L
Our benefits
Description
Mixture: 1:50 (2%) ie 20 ml per 1 liter of gasoline
Packaging: 1 liter (bottle with 140 ml dispenser).
The vial is provided with a 140 ml dispenser.
Original Husqvarna product.
Husqvarna 2-stroke engine oil. A semi-synthetic oil with low smoke emission, which provides excellent anti-seizure protection against piston grip due to the salty mixture and calamine. The package of additives contained is one of the best on the market, and the oil ensures low smoke emissions. According to JASO FD / ISO EGD requirements and Rotax 253 snowmobile test.
Notice! The chainsaw is powered by a two-stroke engine and must be powered by a mixture of gasoline and oil for two-stroke engines. It is important to accurately measure the amount of oil used to ensure proper mixing. When preparing small amounts of fuel, even the smallest deviations can drastically influence the composition of the mixture.
Always mix gasoline and oil in a clean gasoline tank.
Always start with half the amount of gas. Then add the full amount of oil. Stir (shake) the fuel mixture. Add the rest of the gasoline.
Stir (shake) the fuel mixture well before filling the chainsaw's fuel tank.
Do not stock up on fuel for more than a month.
If you do not use the chainsaw for a long time, the fuel tank must be emptied and cleaned.
Attention! Catalytic converter engines must be powered by an unleaded oil-gasoline mixture. Leaded gasoline destroys the catalytic converter, the function will cease to exist. The green fuel tank cap on the chainsaws with catalytic converter indicates that they should only be refueled with unleaded petrol.
The minimum recommended octane number is 90. Detonations can occur if the engine is powered by gasoline with an octane number less than 90. This leads to increased engine temperature and increased loads, which can lead to severe engine damage.
When working at high speeds for a long time (eg when cutting branches), a higher octane number is recommended.
Use unleaded gasoline or good quality leaded gasoline.
Use Husqvarna two-stroke engine oil, specially designed for optimum results and performance with air-cooled two-stroke engines.
Never use water cooled outboard engines, sometimes referred to as engine oil (TCW).
Never use four-stroke engine oils.
Poor quality oil or too rich oil / fuel mixture can endanger the operation of the catalytic converter and reduce its service life.