Cylinder set (4 strokes) for bycicle 80cc

Description

Cylinder set (4 strokes) 80cc bicycle

The presented product benefits from a guarantee according to Law no. 449/2003 ONLY IF IT IS INSTALLED IN A SPECIALIZED SERVICE !! If the product is installed on its own, IT NO LONGER BENEFITS FROM THE WARRANTY !!

* We can provide for a fee the installation of the kit on the bike (place where the assembly will be done: Pitesti - Arges) - 0751.669.550

Laws vary from state to state and city to city. For complete legal details, contact your local state and / or city authorities. The end user or installer becomes the manufacturer of the vehicle and assumes full legal responsibility.

The set consists of:

3.2 horsepower engine (47mm piston bore), 80cc cylinder capacity (4 strokes)

Maximum speed 60 Km / h
carburettor
Exhaust
2Litre gas tank
Pinion Training
Scooter chain
Bearing chain tensioner
Chain protection
Pinion flange
Electronic ignition
Accelerator lever with button
Gas tap
plug

Installation details:

Some technical and mechanical skills are required to install your engine. Some buyers may complete the work in 2 hours while others may take up to 2 days. In the end, no matter how long it takes, you will get great pleasure and satisfaction by completing this project. At the same time, you will understand the system more easily and it will help you to maintain and operate it. Good luck.

The easiest installation can be done on a standard 26 ”V-shaped frame with a 25 mm tubular profile. But it can be mounted and adapted on other bikes but then it must be adapted to the existing conditions. These motors also have non-standard frame adapters - oval or larger diameters - so that the motor can be attached to the frame. Even if at the beginning of the assembly you will spend more time for finishes and adjustments instead you will ensure thousands of kilometers of operation without operating incidents.

Why would you opt for it? Because it has a double operating life compared to the one in 2t, half fuel consumption, get rid of the clutch lever actuation, you can start it immediately by operating the handle with the string, the engine does not stop running due to understeer.

User Manual 4-stroke bicycle engine kit: