RATO R390 10Cp motor hoe engine – 72mm shaft – 25mm – EURO 5
Description
RATO motor hoe engine;
The Rato R390 is a general-purpose, single-cylinder, air-cooled, 4-stroke, internal combustion engine with a horizontal crankshaft, with a displacement of 389 cm³ (23.7 cu in), manufactured by Chongqing RATO Holding (Group) CO., LTD.
The Rato R390 engine features an overhead valve (OHV) design; a carburettor with a flat intake valve; a recoil starter or electric starter; a transistorised magnetic ignition (TCI) system; and a mechanical centrifugal governor.
The R390 engine has a cylinder bore of 88.0 mm (3.50 in) and a piston stroke of 64.0 mm (2.50 in), with a compression ratio of 8.0:1. It produced 13.0 CP at 3,600 rpm and a torque of 25 N·m (2.54 kg·m, 18.43 ft·lb) at 2,500 rpm.
- Model R390
- Shaft length: 25 mm
- Shaft diameter: 72 mm
- Type: 4-stroke, OHV, single-cylinder
- Displacement: 389 cm³ (23.7 cu in)
- Maximum power: 13.0 CP at 3,600 rpm
- Maximum torque (at the crankshaft) 25 N·m (2.54 kg·m, 18.43 ft·lb) at 2,500 rpm
- Flat-slot
carburettor - Cooling system: Forced
air - Ignition system: Transistorised magneto ignition (TCI)
- Lubrication system: Splash
lubrication - Starting system: Electric starter / recoil
starter - Shutdown system: Grounding of the primary ignition
circuit - Fuel used Unleaded petrol (octane rating 86 or higher)
- Cardan shaft rotation: Anti-clockwise (as viewed from the cardan shaft)
- Cylinder block and cylinder
head - The Rato R390 engine features a cast iron cylinder liner, double ball bearings and a forged and hardened steel crankshaft.
- Compression ratio: 8.0:1
- Bore x stroke 88 x 64 mm (3.5 x 2.5 in)
- Inner sleeve diameter 88.000–88.017 mm (3.4645–3.4652 in)
- Piston skirt outer diameter: 87.965–87.985 mm (3.4631–3.4640 in)
- Number of piston rings (compression / oil): 2 / 1
- Top/second piston ring end clearance 0.015–0.045 mm (0.0006–0.0018 in)
- Top/second piston ring end clearance: 0.20–0.40 mm (0.008–0.016 in)
- Oil clearance: 0.20–0.70 mm (0.008–0.027 in)
- Connecting rod end ID 20.005 mm (0.7876 in)
- Connecting rod end bore diameter 36.025 mm (1.4183 in)
- Crankshaft pin outer diameter 35.985 mm (1.4167 in)
Cylinder head
- Deformation (limit) 0.10 mm (0.004 in)
- Valve arrangement: OHV
- Valves: 2
- Outer diameter of pushrod (standard):
- INLET 6.590 mm (0.2594 in)
- EXHAUST 6.550 mm (0.2579 in)
- Camshaft lift:
- INTAKE 33.6–33.8 mm (1.3228–1.3307 in)
- EXHAUST 32.90–33.10 mm (1.2952–1.3031 in)
- Valve spring free length: 39.0 mm (1.5354 in)
- Camshaft journal diameter: 15.984 mm (0.6293 in)
Genuine RATO product
Details
What customers are saying
Fii primul care scrie o recenzie.
Scrie o recenzie