Engine for generator / motorpump/ cultivator Loncin 5 HP vertical axle (22.2mm x 55mm)

Description

Motor for cultivators, motor pumps, agricultural equipment, water pumps, industrial machinery, generators, etc. Loncin 20 HP vertical axis.

Technical specifications:

Shaft: Cylinder, Straight

Shaft Diameter: Ø22
Model: LC1P65FA
Oil Bath Capacity (l): 0.55
Spark Plug Gap: 0.7-0.8 mm
Spark Plug: F7RTC
Idling speed (rpm): 1800±15
Oil Change (First Review): 10 hours
Power(HP): 5
Power (KW): 3.7
Speed ​​(RPM): 3600
Engine Type: Mono cylinder, 4T, air cooling, OHV
Maximum Torque (Nxm/rpm): 8.8/2500
Fuel consumption (g/Kwh): 395
Fuel Tank (L): 1.2
Transmission: Pinions in the oil sump
Bore x Stroke(mm): 65x48
Cylindrical capacity (cmc): 159
Compression Ratio: 8.7:1
Starting: Recoil starter
Valve: Inlet: 0.1~0.15mm Outlet: 0.15~0.20mm
Filter: Semi Wet, in an oil bath
Net Weight (Kg): 12
Dimensions (mm): 430x380x380
Noise (db(A)): -

Manufacturer: Loncin