Device for sharpening brush cutter discs
Our benefits
Description
Sharpener for brush cutter discs.
The device is used with a small hand grinder (not included).
The knife must first be mounted on the appliance. The grinder must be fixed in the universal socket.
The position of the disc holder is adjustable and must be fixed in the correct position before the grinder is turned on. The grinding process will be performed manually. Each time the lever is moved forward, the grinding disc of the device will be moved to the initially set position and will sharpen the cutting tooth of the disc. Each time the lever is moved back, the position of the knife will be mechanically moved to the next tooth. (will jump over a tooth)
This procedure will be repeated until the knife has made a complete turn (360 °). The same procedure should be followed for previously overgrown teeth that correspond to different angles. There are 2 different grinding angles for teeth (see original knife).
This device will ship without a disc, please order separately accessing the following page:
https://www.generalmotor.ro/cumpara/disc-pentru-ascutit-dinti-vidia-7758394
Can be used for knives with a central hole of 24.5 mm.
The 20 mm center hole adapter can be ordered from the following page:
Below you can see a demonstration video: