Protection glasses for brush cutter (transparent + orange)

Description

Protection glasses for brush cutter (transparent + orange).

Goggles. These goggles are designed to protect your eyes from mechanical impact, flying particles, spikes (JG101 only, JG101PE JG103) and splashes (JG102, JG104 only). Please note that these glasses do not offer total protection, for It is your protection to read these instructions completely before using the glasses. When not in use, it is recommended that the glasses be stored in a dry place. These goggles are intended for your protection and must be worn at all times. Do not use the glasses if they are damaged. Pt. do not use abrasive materials. Clean the glasses with warm soapy water and then wipe with a soft cloth. Parts that come in contact with the wearer should be disinfected with alcohol. Check the glasses regularly, when they are defective or when the frame becomes tart and the glasses break, they need to be replaced. CAREFUL.

These goggles are intended to protect the eyes against moderate dangers. THEY ARE NOT INDESTRUCTIBLE. Do not change the glasses. Parts of the glasses that come in contact with the skin can cause irritation to sensitive people. Observe the protective regulations applicable to each activity performed when wearing glasses. The CE marking was issued by the notified body INSPEC 0194.. These glasses comply with the European Standard EN166: 2001. The corresponding markings can be found on the glasses.