Brush cutter protection glasses

Description

Goggles with yellow glass.

Goggles These goggles are intended to protect the eyes against mechanical impact, flying particles, drops (only, JG101, JG101PE JG103) and splashes (only JG102, JG104). Attention, these glasses do not offer total protection, for your protection read these instructions in full before using the glasses. When not in use, it is recommended that the glasses be stored in a dry place. These goggles are intended for your protection and must be worn throughout exposure to hazards. Do not use the glasses if they are damaged. Pt. cleaning do not use abrasive materials. Clean the glasses with warm soapy water and then wipe with a soft cloth. The parts that come in contact with the wearer must be disinfected with alcohol. Periodically check the glasses, when they are defective or when the frame becomes hard and the glasses break, they must be replaced. CAREFUL.

These glasses are designed to protect the eyes against moderate dangers. THEY ARE NOT INDESTRUCTIBLE. Do not change the glasses. Parts of the glasses that come in contact with the skin can cause irritation to sensitive people. Observe the protection rules corresponding to each activity performed when wearing glasses. The CE marking was issued by the notified body INSPEC 0194.. These glasses comply with the European Standard EN166: 2001. The corresponding markings can be found on the glasses.